Although it has a below-average ice output, the Marvel 250IMSSFR ice maker is a remarkable machine thanks to its high-quality construction and design. Our Marvel ice maker review will go through the general description, technical specs of this machine, its pros and cons, and the ease of installation and use. We will also go through some Marvel ice maker reviews from verified customers.
Marvel 250IMSSFR Ice Maker Description
- Produces up to 34 lbs. and stores 30 lbs. of clear ice cubes in 24 hours (ice scoop included)
- Stainless steel ice cutter for consistent cube size and shape
- High efficiency, low maintenance condenser design for built-in (zero clearance) installations
This Marvel ice maker is an elegant appliance with thermal-efficient insulation for minimum energy consumption and high performance. Its exterior is made of corrosion-resistant, high-quality stainless steel that’s also fingerprint-resistant. It features a removable ice bucket for extra convenience if you need to carry ice to the table or just place it on the counter while making drinks.
One of the most important things you should keep in mind from this Marvel ice maker review is the fact that the 250IMSSFR ice maker from Marvel is right-hinged – if you are looking for its left-hinged counterpart, what you need is the 250IMSSLR. The left-hinged model features an elegant bar handle that runs from the top to the bottom of the door and has almost the same height. The controls of this ice maker are pretty straight-forward and are discreetly positioned on the bottom ventilation grill. You can see more details about this Marvel ice maker in the product presentation document or in the installation & operation instructions mentioned below.
The manufacturer offers a 1-year limited warranty for this appliance which covers most of its parts
Marvel 250IMSSFR Ice Maker – Specs
- Dimensions: 14.875 x 33.75 x 21.7812 inches
- Weight: 86 pounds
- Voltage: 115 V
- Watts: not listed
- Amps: 15 A
- Frequency: 60 Hz
- Certifications: not listed
- Daily Ice Making Capacity: 7 pounds
- Ice Shape: crescent
- Installation: built-in
- Energy Star Rated: yes
- Refrigerant Type: not listed
- Operating Cycle: continuous
- Ice Making Capacity Per Cycle: not applicable
- Display Type: none
- Full Ice Basket Indicator: no
- Add Water Indicator: not applicable
- Drain Type: not required
- Number of Ice Sizes: one
- Timer: no
- Self-Cleaning Function: no
- Automatic Overflow Protection: not applicable
- Ice Storage: 15 pounds
- Removable Ice Bin: yes
- Reversible Door: no (the 250IMSSFR model is right-hinged, the 250IMSSLR is left-hinged)
- Water Capacity: not listed
Operating the Marvel 250IMSSFR Ice Maker
Since this Marvel ice maker is a built-in appliance, it’s recommended to hire a professional for its installation. Nevertheless, if you’re experienced and handy, you might be able to do so yourself. All the information needed to go through with installing and connecting the water supply are mentioned in this document, as well as troubleshooting tips for the Marvel ice maker.
You will need to keep the leveling legs at the same length to make sure the appliance is vertical as a slightly crooked position will cause issues while functioning. It’s also important to allow the appliance to sit for at least 24 hours in an upright position after unpacking and before plugging it in to allow the refrigerant and oils to set after transportation. Not doing so might cause damage to the compressor which will not be covered by the manufacturer warranty. The machine properly works between 65 and 90F; to ensure it will properly run, you should never obstruct the ventilation panel found at the bottom of this ice maker.
After installing and allowing 24 hours to pass, you can plug in the ice maker and switch it on. At first, the manufacturer recommends allowing the ice maker to run a cycle at its factory-preset temperature so that the interior temperature can stabilize.
The machine will begin to produce ice as soon as the interior temperature has reached factory-preset levels. After producing enough ice to fill the 15-pound ice tray, the Marvel ice maker will automatically shut off until all or part of the ice is removed.
Marvel 250IMSSFR Ice Maker Pros & Cons
This section of our Marvel ice maker review focuses on the Marvel 250IMSSFR’s strengths and weaknesses.
- Great modern built-in design.
- High-quality build that makes it very long-lasting.
- Very quiet even for a built-in ice maker.
- At just 7 pounds, the daily ice output is lower than average.
- Doesn’t have a self-cleaning function.
- Only has one ice cube size.
Note: This ice maker is featured on this list of the best outdoor ice makers on the market – if what you read in this Marvel ice maker review isn’t exactly what you were looking for, make sure to check it out!
What Users Say
Although this appliance doesn’t have any reviews on Amazon.com, customers who purchased and reviewed this built-in ice maker on other websites are very happy with their purchase. They note it works just as promised in the product sheet and makes high-quality ice.
All in all, the Marvel 250IMSSFR ice maker is an outstanding ice machine. It has an impeccable minimalist design that goes great in almost any kitchen or living room décor and the fact that it’s a built-in appliance only makes it more sleek and discreet. The ice output is average at best, but for a residential ice machine, this sure does its job well. If you live in a small household and only want the best appliances around you, the Marvel 250IMSSFR should definitely be among your top choices.
What did you think of our Marvel ice maker review? Is there anything we left out? If you own one of these appliances and want to weigh in with your opinion, use the comment section below to let us know how the installation went and how the machine behaves!